If you’re working on DIY projects around your home, working on automotive, or even construction projects, you can not overlook the essence of using the right tools to get jobs done easier. However, the right tools include the best wrench sizes smallest to largest. Do you want something that can help you with a range of different tasks without wasting too much time? Then you might want to resort to a bit of research.
Well, you might actually not need to get yourself into that stress as it can be a tiring task to venture into. Without further ado, we’ve a task-saber here that can help handle your basic DIY or workshop tasks. We’ve got one of the most reliable ratchet sizes smallest to largest – GEARWRENCH 16 Pc. 12 Point Ratcheting Combination Metric Wrench Set.
GEARWRENCH 16 Pc. 12 Point Ratcheting Combination Metric Wrench Set Review
If you are looking for one of the best ratchet wrench sets, that’s worth the money, I bet you cannot go wrong with this GEARWRENCH 9416 16 Piece Metric Master Ratcheting Wrench Set. The smallest sizes come in 5 degrees, and it can be when you need to move small fasteners.
The biggest one comes in 30 degrees and can be used in cases when you need to move standard, large wrenches. The 16 different sizes have an equal interval of sizes, which makes it a complete set with virtually all the sizes you need for the job.
This ratchet size may seem hard to notice for notice, but with each ratchet according to their sizes, it’ll be easy to drive, which is to pick. These stamps are made on both ends of the alloy steel beam for quick identification when yanking from a cluttered toolbox.
Also, it comes with a polished chrome finish, which adds to the beauty of this ratchets and protects them from corrosion. Each ratchet comes with an off-corner loading design to reduce the risk of fastener rounding.
Each of the 16 wrenches includes a 72-tooth ratchet box end allowing for turns as small as five degrees and a thinner head and beam to assist with hard-to-access fasteners. There is also a matching 13-piece SAE version available for fans of Imperial measurements.
- 72 tooth ratcheting box end needs a minimal 5 to...
- Off corner loading design on box end provides...
- Pass thru technology works down any length of...
It is so difficult to find a fault in this GREATWRENCH starting from the design, collection, and to external finish; the manufacturer’s thoughtfulness is clearly seen. Apart from the fact that the slim design will enhance overall performance, it also ensures users’ comfort when handling each ratchet.
This ratchet didn’t only come with the conventional grip that’s common with most tools in the market. It also features an off-corner grip inside. With this, the teeth will, in no doubt, deliver a tight catch in cases when you need to move fasteners. Besides, this type of interior teeth design will reduce the fastener rounding by a tangible amount.
There are times when you need to apply these ratchets on either spacious or narrow places. The ratchet has been built in such a way that you don’t need to apply an extra effort to hold the objects, especially when you’re working on a large workpiece.
Other conventional ratchets always have issues with dealing with narrow spots, but that can’t be the case with this ratchet set. The slender and sleek design has put this GEARWRENCH 9416 16 Piece Metric Master Ratcheting Wrench Set into a different zone. Now, you should be able to work on the narrowest spot provided you properly place any of these ratchets.
Finally, transporting your tool sets comes easier this time. There’s a locket carrier in place that helps to properly store all the tools according to their sizes.
Metric Sizes: 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, and 24mm.
SAE Sizes (matching set): ¼″, 5/16″, 3/8″, 7/16″, ½″, 9/16″, 5/8″, 11/16″, ¾″, 13/16″, 7/8″, 15/16″, and 1″.
Pros
- Sixteen pieces of smooth and strong ratchets in one set
- 5 degree of ratcheting arc in each of the pieces
- Can access to tight work spots without any other positioning
- Firm grip over the objects with less rounding
- Made of durable steel allow, with chrome finish
- Protective against rust, water splashes, and wearing
- Stylish and minimalistic-type safety container
Cons
- Sometimes, one of the 16 pieces come to be missing in the set
1. What are the wrench sizes in order ?
Standard American wrench sizes, from the largest to smallest and measured in inches, are 5/8, 19/32, 9/16, 1/2, 7/16, 3/8, 11/32, 5/16, 9/32, 1/4, 7/32, 3/16, 5/32 and 1/8. Wrenches are available in a set or individually.
2. What is the smallest wrench size ?
Bolt Diameter – 1/4″ Wrench Size (Standard) – 7/16″ Wrench Size (Metric) – 11mm
3. What are SAE wrench sizes ?
SAE Wrench Size – 5/8″ Bolt Size (SI) – 7/16″ Metric Wrench Size – 16 mm
4. How are wrench sizes measured ?
Measure the distance across the flat sides of the bolt head using the vernier caliper. This measurement will give the size of wrench you would need to unfasten or tighten this bolt. Use inches for standard bolts and millimeters for metric bolts.
More Wrench Sizes Smallest To Largest Products –
Conclusion
There’s no denying the performance and quality of this GEARWRENCH 16 Pc. 12 Point Ratcheting Combination Metric Wrench Set. The lightweight design and sturdy build make it a popular pick in the commercial settings where they are frequently used. This may very well be the best wrench sizes smallest to largest on the market. While it’s not a cheap tool set, the intriguing features and effectiveness bring a consolation.
Metric Wrench Sizes
Wrenches:
Metric Combination Wrenches (6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19)
Metric Flare Nut Wrenches (9, 10, 11, 12, 13, 14, 15, 17) Note: Each wrench may combine two sizes
Wrench Size Chart Conversion (SAE to Metric)
| SAE Size | Metric Size | Inches Decimal | Both Close enough Note |
|---|---|---|---|
| 5/32″ | 0.156 | 5/32″ & 4mm | |
| 4mm | 0.157 | ||
| 4.5mm | 0.177 | ||
| 3/16″ | 0.188 | ||
| 5mm | 0.197 | ||
| 5.5mm | 0.216 | ||
| 7/32″ | 0.219 | ||
| 6mm | 0.236 | ||
| 1/4″ | 0.250 | ||
| 6.5mm | 0.256 | ||
| 7mm | 0.276 | ||
| 9/32″ | 0.281 | ||
| 5/16″ | 0.313 | 5/16″ & 8mm | |
| 8mm | 0.315 | ||
| 11/32″ | 0.344 | ||
| 9mm | 0.354 | ||
| 3/8″ | 0.375 | ||
| 10mm | 0.394 | ||
| 13/32″ | 0.406 | ||
| 11mm | 0.433 | 7/16″ & 11mm | |
| 7/16″ | 0.438 | ||
| 15/32″ | 0.469 | 15/32″ & 12mm | |
| 12mm | 0.472 | ||
| 1/2″ | 0.5 | ||
| 13mm | 0.512 | ||
| 17/32″ | 0.531 | ||
| 14mm | 0.551 | ||
| 9/16″ | 0.563 | ||
| 15mm | 0.591 | 19/32″ & 15mm | |
| 19/32″ | 0.594 | ||
| 5/8″ | 0.625 | ||
| 16mm | 0.63 | ||
| 21/32″ | 0.656 | ||
| 17mm | 0.669 | ||
| 11/16″ | 0.688 | ||
| 18mm | 0.709 | ||
| 23/32″ | 0.719 | ||
| 19mm | 0.748 | 3/4″ & 19mm | |
| 3/4″ | 0.75 | ||
| 25/32″ | 0.781 | ||
| 20mm | 0.787 | ||
| 13/16″ | 0.813 | ||
| 21mm | 0.827 | ||
| 27/32″ | 0.844 | ||
| 22mm | 0.866 | ||
| 7/8″ | 0.875 | ||
| 23mm | 0.906 | 29/32″ & 23mm | |
| 29/32″ | 0.906 | ||
| 15/16″ | 0.938 | ||
| 24mm | 0.945 | ||
| 25mm | 0.984 | ||
| 1″ | 1 | ||
| 26mm | 1.024 | ||
| 1-1/16″ | 1.063 | 1-1/16″ & 27mm | |
| 27mm | 1.063 | ||
| 28mm | 1.102 | ||
| 1-1/8″ | 1.125 | ||
| 29mm | 1.142 | ||
| 30mm | 1.181 | ||
| 31mm | 1.221 | ||
| 1-1/4″ | 1.25 | 1-1/4″ & 32mm | |
| 32mm | 1.256 | ||
| 33mm | 1.299 | ||
| 1-5/16″ | 1.313 | ||
| 34mm | 1.339 | ||
| 1-3/8″ | 1.375 | 1-3/8″ & 35mm | |
| 35mm | 1.378 | ||
| 36mm | 1.417 | ||
| 1-7/16″ | 1.438 | ||
| 37mm | 1.457 | ||
| 38mm | 1.496 | ||
| 1-1/2″ | 1.5 | ||
| 39mm | 1.535 | ||
| 40mm | 1.575 | ||
| 41mm | 1.614 | ||
| 1-5/8″ | 1.625 | ||
| 42mm | 1.654 | ||
| 1-11/16″ | 1.688 | 1-11/16″ & 43mm | |
| 43mm | 1.693 | ||
| 44mm | 1.733 | ||
| 1-3/4″ | 1.75 | ||
| 45mm | 1.772 | ||
| 46mm | 1.811 | ||
| 1-13/16″ | 1.813 | ||
| 47mm | 1.85 | ||
| 1-7/8″ | 1.875 | ||
| 48mm | 1.89 | ||
| 49mm | 1.923 | ||
| 50mm | 1.969 | ||
| 2″ | 2 | 2″ & 52mm | |
| 51mm | 2.008 | ||
| 52mm | 2.047 | ||
| 2-1/16″ | 2.063 | ||
| 53mm | 2.087 | ||
| 2-1/8″ | 2.125 | 2-1/8″ & 54mm | |
| 54mm | 2.126 | ||
| 55mm | 2.165 | ||
| 2-3/16″ | 2.188 | ||
| 56mm | 2.205 | ||
| 57mm | 2.244 | ||
| 2-1/4″ | 2.25 | ||
| 58mm | 2.283 | ||
| 59mm | 2.323 | ||
| 60mm | 2.362 | ||
| 2-3/8″ | 2.375 | ||
| 61mm | 2.402 | ||
| 62mm | 2.441 | ||
| 63mm | 2.48 | ||
| 2-1/2″ | 2.5 |
Standard Wrench Size Chart For Bolts
| Bolt Diameter | Wrench Size (Standard) | Wrench Size (Metric) |
|---|---|---|
| 1/8″ | 5/16″ | 8mm |
| 3/16″ | 3/8″ | 10mm |
| 1/4″ | 7/16″ | 11mm |
| 5/16″ | 1/2″ | 13mm |
| 3/8″ | 9/16″ | 15mm |
| 7/16″ | 5/8″ | 16mm |
| 1/2″ | 3/4″ | 19mm |
| 9/16″ | 13/16″ | 21mm |
| 5/8″ | 15/16″ | 24mm |
| 3/4″ | 1-1/8″ | 29mm |
| 7/8″ | 1-5/16″ | 34mm |
| 1″ | 1-1/2″ | 38mm |
| 1-1/8″ | 1-11/16″ | 43mm |
| 1-1/4″ | 1-7/8″ | 48mm |
| 1-3/8″ | 2-1/16″ | 53mm |
| 1-1/2″ | 2-1/4″ | 58mm |
| 1-5/8″ | 2-7/16″ | 62mm |
| 1-3/4″ | 2-5/8″ | 67mm |
| 1-7/8″ | 2-13/16″ | 72mm |
| 2″ | 3″ | 77mm |
| 2-1/4″ | 3-3/8″ | 86mm |
| 2-1/2″ | 3-3/4″ | 96mm |
| 2-3/4″ | 4-1/8″ | 105mm |
| 3″ | 4-1/2″ | 115mm |
