How To Remove A Stuck Faucet Stem

Removing a stuck faucet stem to replace with a new one shouldn’t be a difficult task for you to do as long you have all the necessary tools and you are well skilled in how to do the removal and replacement.

However, this page on how to remove a stuck faucet stem will guide you through the process and help you achieve the task without stress.

Even when it seems easy, things can get too difficult, especially when dealing with a stuck faucet and some tough nut. However, with the right tools, you are at a higher chance of getting the task done with ease.

When you are all set to remove a stuck faucet stem, there are essential things that you need to have in possession and they are called tools.

What is the faucet stem removal tool you need?

  • Pliers (channel locks, needle-nosed, vice grips)
  • Screwdriver
  • Lubricant like WD40
  • Drill and drill bits
  • ½ inch screw extractor
  • Box wrench
  • Allen wrench
  • Core puller (faucet stem removal tool)

How to remove a stuck faucet handle


Now that you’ve got the necessary tools available, you should consider starting the whole removal process.

Shut off the water

You do not want to make your work messy, and aside from that, I’m sure you do not want to waste a lot of water while working, which is why you should consider shutting off the water. To do that, you need to locate the shut-off valve that allows the flow of water to the faucet, and then you shut it off.

Once it is closed, the water wills top running, and then you can also empty the faucet you are about to work on if that is possible for you to do.


How to remove a corroded faucet handle

You need some materials if you want to remove the faucet handle, and they are:

  • Flat-head screwdriver
  • Penetrating oil
  • Wrench
  • Hammer
  • Dry rag
  • Small, stiff-bristle brush
  • Vinegar or scale dissolver
  • Now, let’s go through how to remove a stuck faucet handle with the materials listed above.

Remove scale deposit


If your bathroom faucet handle removal is the task you are faced with, then you need to check if the faucet handle is old or not. If the handles are old, you will likely see some mineral deposits built up within the handle over the years.

Sometimes, the accumulation of the minerals is a result of hard water without a filter, and it results in your faucet handle getting stick and tough easily.

So, for you to remove the scale deposit or minerals from the faucet handle, here are things that you need to do.

Step one

If your faucet handle stuck, the first thing you need to do is to pry off the cap of the faucet handle with a flat head screwdriver. Once you can pry off the cap, you can have easy access to the valve area within the handle.

Step two

Pick up the white vinegar and pour it over the handle, as you should never dilute with water to keep it very effective. You do not have to worry if the vinegar drips to other areas. However, if you are skeptical, you can cover your sink area with a towel.

Step three

It would help if you left the vinegar to sit for half to one hour, and it will work to break down and loosen the mineral deposition around the faucet to make it easy for you to open without much stress or pressure.

If you notice it is still hard to turn or move, you should repeat the process of adding vinegar and leave for another hour before you try to move n to the next task.


Remove all sorts of corrosion


The next step is for you to remove the corrosion from the faucet handle. If your faucet handle is made from metal, they are likely to rust quickly. So here are steps you need to take with dealing with the corrosion.

Step One

It would help if you took off the faucet cap using a flat head screwdriver. You should unscrew the screw beneath the cap so that you can have a clear view of the valve inside.

Step two

If you notice the valve to be brownish-red in color, it is an indication that you have rust. Pick up your stiff bristle brush and clean out the areas to the best you can. It would help if you moved inside the hole as you dig and brush out the rust. You should wipe off the brush as you work to be sure you are cleaning out the rust.

You should clear out all forms of rust as it is one of the significant reasons the faucet can get stuck.


Oil and Force


Sometimes old faucet handles will get stuck due to corrosion even after you’ve removed the rust debris. There are some interior parts of the faucet that your brushes can’t get to, so you need to take a step that will reach out to those areas.

Step one

Since you still have the cap opened, you need to place your penetrating oil inside the valve and around the base of your faucet handle. You can either pour the oil or spray it over to give precise and accurate application. It would help if you allowed the oil to sit for hours.

Step two

You should take a dry rag and try to turn the faucet handle at this stage, and you will notice you find it easy to turn. However, suppose the bathroom faucet removal problems persist. In that case, you should tap the handle lightly using your hammer in the direction you want to turn it, which is usually in the counterclockwise direction.

Step three

When you tried using a hammer and didn’t loosen the stuck faucet, you should reach your wrench. Go ahead to tighten the faucet handle using your wrench, and then with light pressure, you should turn the wrench in the direction that would open the water. With the help of the force, penetrating oil, and vinegar solution, the faucet handle will finally turn.

As soon as you notice it turn, you can go ahead to remove the wrench using your hand. If you apply too much force to the faucet handle, it might get damaged. It is the same step as dealing with a stuck shower handle.

Final Words

Replacing the sink valve is a difficult task, especially with a stuck faucet. It is the reason we have here for you, the information on how to remove a stuck faucet stem on your own if you do not want to hire professionals.

Dealing with a stuck faucet requires lots of patience, and one needs to carefully go through the process so as not to cause any damages to the faucet.