As a beginner woodworker, you might be confused about whether you need a table saw or not. I have heard many ask the question, “why do I need a table saw for woodworking”?
Deciding on getting one or not depends on the nature of the work you have at hand. If you are doing lots of woodcutting, you might want to consider getting a table saw.
However, we will share with you on this page more you should know about table saw, which will help you decide if indeed you need one or not.
Some choose the hard way of cutting wood using a chisel and hammer, but it is never as smooth and effective as using a table saw.
What are the uses of Table Saws? Is A Table Saw Necessary? Benefits of a Table Saw
It is one of the powerful tools used by a carpenter or for most woodworking tasks. Table saws are well known for their ripping capacity and versatility.
Benefits of a table saw – Rip Cuts, Bevel Cuts, Cross Cuts, Dado Cuts, Rabbets and groove cuts etc
With that been said, what are the applications of the table saw? And how can you use them?
Ripping cuts is the most common task of a table saw. It helps with cutting wood to width. The tool has a powerful motor and uses a sharp blade, making it very easy to cut a more comprehensive wood into a smaller piece.
It saves the stress of using a chisel with a hammer or using a circular saw which could sap your energy and time. The table saw is indeed a good machine that makes the ripping of wood easier to do.
Read this post if you want to know about – Circular Saws with dust collector
One of the other cuts that you can trust to achieve using a table saw is the bevel cuts. The machine is engineered with a liberal setting which helps to achieve bevel cut.
The machine has a cast iron wheel beneath the table that helps in changing the direction of the blade to get a bevel cut efficiently.
Generally, the most table saw has 0 to 50-degree bevel adjustment which makes it easier for you to get the desired cut without stress.
Cutting woods in length is known as cross-cutting. If you need to cut any wood to length, a table saw is a right tool for you. It cut wood smoothly and efficiently, which is the reason most carpenters opt for it over any other.
Rabbets and groove cuts
Groove and rabbet cuts are very easy with a table saw. The table saw makes the smoothest rabbets and groove cuts, but it is tricky, which means one needs to be careful when using it. Before you decide to cut anything, you should secure the workpiece with clamps and a dual-faced tap.
For any task that deals with making cabinets or shelves, you need a dado cut, and the best tool for this is the table saw. Dado cut is relatively complex, and you need a table saw with your skills to get the edges rightly and also ensure the cut is precise and accurate for the task you have at hand.
Now that you’ve got to know the cut, you can do it with a table saw, and you need to be familiar with the parts of the table saw, which will help you through the easy and smooth operation of the machine.
Read this post if you want to know about – Different Types of Table Saws
Parts of A Table Saw
The table is one of the parts of the table saw. The whole of the setup is designed on a table which is the reason it is called a table saw.
The fence is a long guide parallel to the blade, and it is there to keep a distance between the blade and the wood during a ripping cut. Also, it has a fenced dog that helps to level lock the fence in place. You’ve got to press firmly to keep it active.
The blade of the table saw is another part you need to know. It is the most dangerous part of the machine. It is responsible for cutting, and there are different types of blades.
The blade insert is another part that you need to know. It is simply an insert that fills the hold, which is used in swapping blades.
Blade height adjustment wheel
It is the wheel that is being used to adjust the height of the blade. Also is the angle adjustment lever that is being used to change the angle of the blade. The angle indicator is on the front of the table saw behind the height adjustment wheel.
It is quite difficult to initiate the table saw without the push button or power button. You need to figure out the right mechanism to turn on and off the machine.
What are safety measures with using a table saw?
Your safety with using a table saw relies on you understanding the things that you need to do with the machine.
Never wear gloves
You might think it is right to use hand gloves whenever you are operating a table saw, but that is never the right thing to do. Gloves can easily get trap in the blade of the table saw, and that will cause lots of havoc than you can ever imagine.
So, to be on the safe side of operating a table saw, it is very good that you don’t use a hand glove.
Keep the table saw free of dust
You should be so sure you can see the blade clearly as an accumulation of dust in front of the blade can impair your vision. So, you need to clear the dust in front of the blade and ensure it is clean and easy for you to see.
Wear proper eye and hearing protective equipment
If you are working with a table saw, you need to make use of your ear protective equipment and also make use of the eye and nose cover. Dust can easily penetrate through your nostril, get into your eyes and cause a hazard.
So, you need to do all it takes to prevent that. Also, your hearing ability can be affected since the table saw makes a lot of noise.
Is A Table Saw Necessary?
Why Do I need a table saw for woodworking? This post gives the right answer to the question. We’ve got the right information you need here to choose when and where to use a table saw.
Most importantly, you need to be very careful with handling the machine as it is one of the dangerous woodworking tools out there.